濟南鋁板http://www.24276.cn/之花紋鋁板在我們日常的生活中也經常用到的，下面濟南廣大鋁業的有關專家給大家介紹一下花紋鋁板的安裝技巧。
　　
1、濟南鋁板如果是型鋼類骨架，可先用電鉆在擰螺釘的位置鉆一個孔，孔徑應根據螺絲的規格決定，再將花紋鋁板條用自攻螺絲擰牢。如果是木骨架，則可用木螺絲將花紋鋁板擰在骨架上。
If the class aluminum Jinan steel skeleton, may be in the position of screwing drill drill a hole, aperture should be decided according to the specifications of the screw, and then pattern aluminum strip with self-tapping screws firmly.If it is wood frame, you can use wood screws to be screwed onto the skeleton pattern aluminum.
　　
2、采用螺釘頭不外露連接法，即花紋鋁板條的一端用螺釘固定，另一根花紋鋁板條的另一端伸入一部份，恰好將螺釘蓋住，在立面效果方面，由于花紋鋁板條之間有6MM寬的間隙，所以形成一條條豎向凹進去的線角，豐富了建筑物的立面，打破了單調的感覺。
Connection with screw head is not exposed method, namely end pattern aluminum strip with screws, the other other end pattern aluminum strips inserted into a part, just to cover the screws in the facade effect, due to the pattern

aluminum Article 6MM wide gap between, so the formation of a section of vertical concave line angle, enriching the facade of the building, breaking the monotony of feeling.
　　
3、濟南鋁板花紋鋁板與花紋鋁板之間的間隙一般為5-10MM，用橡膠條或密封膠等彈性材料處理。
Jinan gap aluminum and aluminum tread pattern aluminum is generally between 5-10MM, elastic material treated with rubber strips or sealants.
　　
4、濟南鋁板http://www.24276.cn/花紋鋁板收口構造處理，水平部位的壓頂，端部的收口，兩種不同材料的交接處，可以采用彈性密封膠進行處理。
Jinan shut aluminum pattern aluminum construction handle, top level sites, shut the ends, the junction of two different materials can be processed using elastic sealant.